You can expect to experience the following benefits from continuous use of Proma PT5 Plus Petrol Treatment:

Surfactant

This ingredient is capable of breaking the surface tension of water to approximately one micron in size, and to encapsulate each particle in Stoddard solvent. This coating prevents contact with metal surfaces, and helps prevent the formation of corrosion in delicate fuel system components.

The fuel tank heats up as engine, transmission and differential heat passes around the tank with vehicle movement. The heat from return fuel exacerbates the problem.

Condensation occurs in the fuel tank, when a change of even a few degrees celsius in temperature occurs, and this condensed water can cause corrosion, and/or fuel system blockages.

Continuous use of PT5 can control water in the fuel system up to six times its own volume.

Detergent

The detergent action of this ingredient in PT5 has the capacity to clean the entire fuel system, combustion chamber/s and exhaust system. As hot fuel evaporates, it leaves behind deposits of olefins, gums, carbon deposits and sludge. All of these contaminants accumulate, and reduce the free flow of fuel and exhaust gases, with a detrimental effect on efficiency, heat transfer and performance.

When PT5 is used continuously, it slowly removes these contaminants. The combustible components are consumed in the combustion chambers and are expelled through the exhaust.

If these are removed too rapidly by overdosing, fuel filter blockages may occur, and combustion chamber deposits can build up on the spark plugs causing misfiring. If this occurs it may affect the noble metals in the catalytic converter.

Many new vehicles now incorporate the fuel filter in the electric fuel pump. These components can be very expensive to replace. For your own information, ask the cost to replace the fuel filter on current fuel injected vehicles from your local mechanic.

Continuous use of PT5 can keep your fuel, combustion and exhaust systems clean.

Top Oil

PT5 Petrol Treatment contains Poly Butane Ashless Lubricant designed to lubricate fuel system, valve and cylinder components. As its name states, it burns without leaving an abrasive ash, which could cause wear. Whilst this ingredient is in very minute proportions it lubricates delicate carburettor and fuel injection components.

The Top Oil helps with valve lubrication, but it does not fully replace the lubricating and anti-knock qualities of the tetra-ethyl lead, to allow engines designed to operate on leaded fuel, to operate safely on unleaded fuel.

It does leave a protective coating on the rings, pistons and cylinder walls during shut-down, and helps provide additional lubrication prior to, and during start-up; as it enters the engine with the fuel, and coats the above components.

It can also be beneficial when added to the fuel tank in dial fuelled engines if the engine is operated for the first few and last few kilometres of a days’ operation.

Continuous use of PT5 assists lubrication prior to, during and after engine use.

Octane Enhancer

The Octane Enhancer enhances the burn, regardless of the octane rating, and assists to reduce any tendency to pre-ignition (which occurs before the spark) or detonation (which occurs after the spark). Both of these conditions can cause severe engine damage.

The Octane Enhancer does not contain any alcohol. Most octane booster additives are based on alcohol, although they may not be described as alcohol. (e.g. methyl tertiary butyl ether).

The Octane Enhancer minimises knocking, and works in conjunction with the Combustion Modifier.

Combustion Modifier

The Combustion Modifier smooths the combustion process, and slows it slightly to help control the flame travel throughout the combustion chamber and throughout the expansion stroke.

The end result is more complete combustion of the fuel, resulting in increased horsepower, improved fuel economy, and reduced exhaust emissions. The reduction in the carbon monoxide and the unburnt hydrocarbon readings is very significant.

When calculating fuel consumption, it is important firstly to allow the product time to perform its many benefits. As the PT5 removes many of the contaminants from the fuel system, these may have a damping effect on the combustion process, until they are cleaned from the system.

Fuel consumption calculations are affected by different batches of fuel, weather and operating conditions, variations in fuel quality and the Oil Company seasonal changes, as well as the inability in modern cars to fill the fuel tank to exactly the same level each time. The tank fill is affected by the setting of the automatic shut-off value in the delivery hose, the degree of foaming in the fuel, and the slope of the site. Consult your Owner’s Manual for the correct fuel and the correct maximum fuel filling procedure.